How to use and maintain the handheld laser welding machine
1. Instructions for use of handheld laser welding machine
1.1. The staff who use the hand-held laser welding machine must undergo professional training, understand the purpose of the system indicator lights and buttons, and be familiar with basic equipment knowledge;
1.2. Workers who use hand-held laser welding machines must inspect the working wire groove before work to ensure that the wiring is not damaged or exposed; it is strictly forbidden to place sundries on the water-cooled machine;
1.3. It is strictly forbidden to place liquid objects and flammable objects on the control cabinet. The temperature of the working room shall not exceed 25 degrees Celsius, and there shall be no leakage of air, water or electricity.
2. Maintenance of handheld laser welding machine
2.1. Perform regular inspections;
2.2. Since the cooling mode of the welding machine is air-cooled, it is easy to suck dust from the surrounding and accumulate inside the machine. So we can clean the dust inside the handheld laser welding machine regularly;
2.3. Regularly check the connection parts of the line.
2.4. Regularly replace defective parts, repair damaged shells, and repair parts of insulation deterioration.
3. the welding gun maintenance of the handheld laser welding machine
3.1. Regularly check and replace the contact tip
3.2. Regularly clean and replace the spring hose
3.3. Inspection of insulating ferrule
The regular maintenance and inspections implemented above can reduce the occurrence of welding failures. Although it takes some time and energy, it can extend the life of the handheld welding machine, improve work efficiency, and ensure the performance of the handheld laser welding machine. In addition, in the process of using a handheld laser welding machine, safety protection cannot be ignored.